Breakout Unit

• Categories:
• Breakout Unit

• Brand:
• Bosun

• Type:
• Hydraulic Support

• Material:
• Carbon Steel

• Processing Type:
• Forging

• Machine Type:
• Breakout unit

• Certification:
• ISO

• Use:
• Machining

• Update Time:
• 09/27/2012

Detailed Info

DZYCZ-II hydraulic breakout unit is designed and manufactured by our company. After absorbing the advanced technique both home and abroad, and combining the characteristic of china's oil industry, it is special used for dismantling, assembling and maintaining different kinds of down-hole, drilling string,and down hole tools.

I key benefits and features；
①high degree of automation
②big torque of the make-up and break-out, can be free adjusted continuously 
③big scope of the suitable casing 
④no slips during the make-up and break-out
⑤no damage for the work surface
⑥speedup spinning,pushing and pulling
⑦Six radial cylinders, action synchronous, clamping force uniform distribution
⑧Full hydraulic action

Parameter:

Efficiency contrary to the Downhole motor

Into high-pressure airless sprayer pneumatic airless sprayer, electric airless sprayer (piston) and Downhole motor , the pneumatic airless sprayer using compressed air source and then the prefer to limit use pneumatic spraying machine.

Should be electric piston airless sprayer and electric diaphragm airless sprayer to compare, is the usual Drill bit driven piston pump plunger movement to re-paint inhalation, after your discharge pressure, due to the exposed plunger and plunger work with the paint in the paint in accordance with plunger abrasive wear before long, once possessing a larger diameter nozzle, the plunger reciprocating frequency increased, increasing plunger wear, short lifetime of the cutter.
Airless spray, high efficiency, smooth and delicate surface, strong adhesion, coating loss and uncover less construction, machinery, ships, furniture coupled with other industries very popular.

Bell warrant high-pressure airless sprayer using some of those world's leading proprietary technology. Prime Minister booster TM system is in many cases restarted and with a couple of seconds to load, consider suction airless sprayer difficult technical challenges, innovative DAP IV inlet valve stick coating used to lower the likelihood, along electric motor ability to resolve, and form a Hydraulic Valves shell, spraying machine capacity building worthwhile Bell tasks of short duration, high-volume.

And replace the plunger highly expensive, in the event the voltage is normal work will lead on to the DC's not normal. And also, active significant backward and forward reciprocating motion, Breakout Unit pulse of an great work, making a volatile spray, paint spray within the wall roughness seriously isn't best. However, the suction Boosting Pump may possibly be the strength rapidly.

How to extend the downhole motor life

Submersible sewage Downhole motor in the municipal engineering, industrial, hospitals, construction, hotels, water conservancy construction and other industries play an important role.

But everything is divided into two types, submersible pumps are the most critical issue is the reliability issue, because the submersible sewage pump use in liquid applications; the transmission medium is a solid material containing some of the liquid mixture;, pumps and motors are very close; pump is a vertical layout, with the impeller rotating components to withstand the weight of the water pressure in the same direction. These issues are in a sealed submersible Drill bit, electrical load capacity, bearing arrangement and selection of a higher than average sewage pumps and other requirements.

In order to improve the life of submersible sewage pump, now at home and abroad, the majority of pump manufacturers to find ways to protect the system, pump, overload, over-temperature fault, leak alarm and automatic shutdown equipment maintenance. However, we believe, in the submersible sewage pump protection system is necessary, it can effectively protect the safe operation of the pump.

However, this is not the key, pump protection system failure is the only remedy is a more passive approach. The key is to proceed from the fundamental, resolved pump seals, overload and other issues, this is a more positive way. To this end, we have the vice impeller and the pump Breakout Unit fluid power sealing technology overload of free diving design technology of sewage pumps, pump seals greatly improves the reliability and load capacity, longer pump life.

Nonmagnetic Stabilizer

• Categories:
• Drilling Stabilizer

• Brand:
• Bosun

• Type:
• Stabilizer

• Machine Type:
• Drilling Tool

• Certification:
• API

• Material:
• Stainless Steel

• Processing Type:
• Forging

• Use:
• Well Drilling

• Update Time:
• 09/20/2012

Detailed Info

Material:

AISI 4145H, AISI 4340, AISI 4140-4142,and Non-magnetic Material.

Hardfacing for IBS FYPE can supply:

HF 1000,HF 2000,HF 3000 and TCI

Delivery Condition of semi-finished stabilizer or reamer forgings:

Heat treated by water quenching and tempering,rough machined to drawing dimensions, UT-Tested according to ASTM A-388

Mechanical property: Requirement:

Tensile Strength 140.000PSI Min

Yield Strength 110.000PSI (0.2% offset)Min

Elongation 13% Min

Reduction of Area 45% Min

CHARPY-V-N 40

Parameter:

The use of pump points

There is also a problem of the total machine time, but as long as the good use and maintenance can ensure the best performance of the machine, which is to ensure the normal supply, Downhole Motor speed to maintain the normal use and management has become a heavy equipment depot in the heavy task.The use of pipeline pump points:

The test work: Check the connection is loose; hand drive dynamic coupling to the rotor turn a few laps to see the unit rotation is flexible, if uneven sound and light and heavy feeling, to determine whether foreign or pump shaft bending, seals installation is not correct, etc.; inspection seal cavity clean oil is filling 20 1 / 2 cavity space; pump unit surface is clean; unit shift load test.Manual start: irrigation Drill Bit (first time), slightly open the outlet valve, start the motor, pump pressure rise and be recognized as a smooth operation when the outlet valve to gradually open condition requirements.

Run check: pipeline pump frequency (frequency) during normal operation, should regularly check and record the pump ammeter, voltmeter, vacuum gauge the import and export, pressure gauges and flow meters and other meter readings. Unit of vibration, noise, temperature, etc. are normal. Seal at fuel leakage should not be obvious.

The normal parking: Close discharge valve, the pump light load, the motor stopped.

The emergency stop condition:Ammeter indicates abnormal work of the pump motor (too large or becomes too small); pump system is making an unusual noise. Vacuum pump inlet pressure gauge, outlet pressure gauge indicates abnormal, Breakout Unit shock and issued different sound large, severe performance degradation. Pump motor odor, air leakage at the oil seal, bearing temperature exceeds 75 degrees and so on.When the machine is a problem, do not worry, the machine should look at the problems and then quickly and propose solutions.

Integral Straight Blade Stabilizer

• Categories:
• Drilling Stabilizer

• Brand:
• Bosun

• Type:
• Stabilizer

• Machine Type:
• Drilling Tool

• Certification:
• API

• Material:
• Carbon Steel

• Processing Type:
• Forging

• Use:
• Well Drilling

• Update Time:
• 09/12/2012

Material:

AISI 4145H, AISI 4340, AISI 4140-4142,and Non-magnetic Material.

Hardfacing for IBS FYPE can supply:

HF 1000,HF 2000,HF 3000 and TCI

Delivery Condition of semi-finished stabilizer or reamer forgings:

Heat treated by water quenching and tempering,rough machined to drawing dimensions, UT-Tested according to ASTM A-388

Mechanical property: Requirement:

Tensile Strength 140.000PSI Min

Yield Strength 110.000PSI (0.2% offset)Min

Elongation 13% Min

Reduction of Area 45% Min

CHARPY-V-N 40

Parameter:

Mill Cutter

• 
  
• 
  
• 
  
• 
  
• 
  
• Categories:
• Milling Tools

• Brand:
• Bosun

• Machine Type:
• Drilling Equipment

• Certification:
• API

• Material:
• Carbon Steel

• Processing Type:
• Forging

• Use:
• Well Drilling

• Type:
• Milling tool

• Update Time:
• 09/10/2012

Sidetracking tools is the tools when the deflector be in one site of casing and fixed, use the milling tools mills the oval window on the casing wall, side track mills the tools for the branch wall.

Parameter:

Adjustable Kick Off Mud Motor

• Categories:
• Downhole Motor

• Brand:
• Bosun

• Machine Type:
• Drilling Tool

• Certification:
• API

• Material:
• Carbon Steel

• Use:
• Well Drilling

• Type:
• Tools

• Processing Type:
• Machining

• Update Time:
• 09/09/2012

• 
  
• Downhole motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling, horizontal drilling, composite drilling, cluster wells, sidetrack wells and well work over etc.,
  Parameter：